Using your microwave oven
MICROWRVE OVEN CONTROLS
When You first plug in the oven, the Display
WIII show “88:88”irthe Control Panel ON/OFF
swatch IS ON (see page 5). If the Display ever
again shows all 8’s, it means your electricity
was off for a while or that the Control Panel
ON! OFF Switch was turned OFF and then
back ON. To clear the 8’s from the Display,
touch CANCEL [the colon remarns on) or
touch In cooking instructrons
One note. The Command and Number
Pads are not buttons. You don’t have to
push them...just touch them.
L Control Panel ON!
OFF Switch
DIGITAL DISPLAY
When you are
using the mrcrowave
oven, this acts as a
display It counts
down time settings and It shows you what
number pads You touched
COMMAND PADS AND SIGNAL LIGHTS
Touch Com-
mand Pads to tell
the microwave
oven what to do
and in what order.
A few examples:
-COOK CYCLE 1
(or 2) tells the
oven You are
going to cook
-COOK POWER
tells the oven
you are going to
cook at less
than full power.
- START tells the oven to start.
Each Command Pad has its own Signal
Light (except START and CANCEL). The Signal
Light comes on when you touch the Com-
mand Pad.
While the oven is running, a Signal Light (or
lights) will be on to show what the oven is
doing.
NUMBER PADS
the oven what vou