Whirlpool MW8570XR Microwave Oven User Manual


 
Using your microwave oven
Microwave oven controls
There are three parts in the control section:
-The Digital Display/Clock, and Indicator Lights
-Command Pads
- Number Pads
Instructions for each control are covered on the
following pages. Read them carefully.
When you first plug in the oven, the Display will
show 88:88. If, after you set the Clock (page 6), the
Display again shows all 8’s, it means your elec-
tricity was off for a while. Reset the Clock.
Di ital display/clock and
in
8
icator lights
you what Number Pads you
touched.
Command pads
Touch Command
Pads to tell the micro-
wave oven what to
do and in what order.
A few examples:
- CLOCK SET tells the
oven you are going
to set the clock.
- START tells the oven
to start. See page
13 for information
on the tone you hear when touching any pad.
Each Command Pad (except START and CANCEL]
lights an Indicator Light on the digital display.
The Indicator Light comes on when you touch the
Command Pad.
While the oven is running, an Indicator Light (or
lights will be on to show what the oven is doing.
Once you’ve touched
a Command Pad to
tell the oven what you
want it to do, you’ll
touch Number Pads to
tell it...
- a time,
- a Cook Power.
- a food
temperature.