Filter
Top Products
7. Touch the Number Pad for
the Cook Power you want.
8.
Touch START.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60% of
full power.
The PROBE TEMP and COOK POWER
Indicator Lights will stay on.
The Display will show “COOL” to
show the food is less than 90°F
As the food cooks, the Display will
show the internal temperature of
the food for every 5°F increase.
When the probe senses the tem-
perature you selected, the oven
shuts off. “End” will show on the
Display and 4 beeps will sound. (You
can stop the beeping by opening the
door or by touching CANCEL.) “End”
will remain on the Display and a
reminder tone will sound every 60
seconds until the door is opened or
CANCEL is touched. The Display will
then show the time of day.
NOTE: ERR will be displayed after START is touched if an incorrect temperature has
been set (less than 90°F or more than 200°F).
NOTE: Some foods are started using a timed (COOK) cycle and finished
by using a tempemture (PROBE TEMP) cycle. You can set PROBE TEMP to
follow COOK, to avoid the need to reset the oven halfway through
cooking. PROBE TEMP can be progmmmed with the Tempemture Probe
out. The oven will then pause between COOK and PROBE TEMP. “PROB”
will show on the Display to remind you to plug in the probe. Touch
START to continue cooking.
Changing the Temperature Setting
l
When using the Temperature Probe, PROBE TEMP settings can be changed before
or during operation:
-Touch PROBE TEMP
-Touch number for new temperature.
-Touch START. The oven will continue cooking to the new temperature. If the new
temperature is lower than the temperature of the food, the oven will shut off