Whirlpool RF390PXP Range User Manual


 
Setting the C
Be sure the kitchen
normal smoke and
lontrols
Is ventilate
I heat odor
for Self-
ed during the
s to dlsappec
1.
Set the Oven Selector and the
Oven Temperature Control on
CLEAN.
3. Push in and release the Self-Clean
Button. A J-hour Self-Cleaning
cycle will be set automatically.
The display will count down the
time in minutes. The Auto Oven
Light and Self-Clean Signal Light
will stay on.
If a cleaning cycle other than
3
hours is desired,
push in and
hold the Bake Hours Button and
turn the Set Time Knob to the new
time up to 4 hours.
l
Use 2 hours for light soil.
l
Use 3 hours or more for moder-
ate to heavy soil.
Cleaning
I
Self-Cleanlng cycle. Thls will help
3r from the room as aulcklv as Dosslble
2.
Move the Lock Lever to the Clean
Position. The Clean Light will come
on only when the lever is all the
way to the right.
4. The Lock Light will come on when
the oven temperature exceeds
normal baking temperatures. The
Lock Lever must not be moved
and the door can’t be opened
when the light is on.
I
NOTE: The Stop Tlme signal ilght
will
flash during the entire clean
cycle.
5. After the cleaning cycle
is
completed, the Auto Oven and
Self-Clean Lights will go off. The
display will show the time of day.
When the Lock Light goes off,
move the Lock Lever back to the
Cook Position. Do not force it.
Wait until it moves easily. This turns
off the Clean Light. Turn the Oven
Selector and the Oven Tempera-
ture Control to OFF:
continued on next page