Filter
Top Products
Using the Oven Controls
Baking
. Position the rack(s) properly
before turning on the oven. To
change rack position, lift rack at
front and pull out.
2. Set the Oven Selector on BAKE.
The “on” Signal Light will come on.
4.
Put food in the oven. NOTE: Oven
racks, walls and door will be hot.
During baKing, the elements will
turn on and off to keep fhe oven
temperature at the setting. The
“heating” Signal Light will turn on
and off with the elements
The top element helps heat
during baking, but does not
8 turn red.
The rack(s) should be placed so the
top of the food will be centered in
the oven. Always leave at least 1% to
2 inches (4-5 cm) between the sides
of the pan and the oven walls and
other pans. For more information,
see the Cooking Guide.
3. Set the Oven Temperature Control
to the baking temperature you
want. The “heating” Signal Light
will come on. The oven is pre-
heated when the’“heating” Signal
Light first goes off.
5. When baking is done, turn both
the Oven Selector and Oven
Temperature Control to OFF. The
“heating” and “on” Signal Lights
will go OFF.