USING THE SELF-CLEANING CYCLE
The self-cleaning cycle uses very high heat to burn away soil. Before
you start, make sure you understand exactly how to USE: the cycle
safely.
BEFORE YOU START
Clean Frame
1.
Clean areas that may not be cleaned
during the cycle Use hot water and deter-
gent or a soapy steel-wool pad on
l
the frame around the oven
l
the Inside of the door, especially the part
outsrde the oven seal.
DO NOT try to clean the fiberglass seal.
DO
NOT move it or bend it.
4.
Remove any pots or pans you may have
stored in the oven. They can’t stand the
high heat.
Wrpe out any loose soil or grease. Thus will
help reduce smoke during the cleaning
cycle
Make sure the motor socket cover is
closed if your oven has a rotisserie
SPECIAL CAUTIONS
DO NOT block the vent
during the cleaning cycle
Air must move freely for
best results.
DO NOT touch the oven
during the cleaning Cycle
. ..it can burn you.
DO NOT use commercial
oven cleaners in your oven.
Damage to the porcelain
finish may occur.
DO NOT force the Lock
Lever. The lever is designed
to stay locked until the
oven is cool enough to
safely open.
DO NOT use foil or other
liners in the oven. During
the cleaning Cycle, foil
can burn or melt.
IO