Filter
Top Products
Receptacle
3. Hold the surface unit as level as possible
with the terminal just started into the
receptacle.
4. While pushing the surface unit terminal into
the receptacle, lift a little on the edge of
the unit nearest the receptacle.
5. When the terminal is pushed into the re-
ceptacle as far as it will go, the surface unit
will fit into the reflector bowl.
Reflector bowls reflect heat back to the
utensils on the surface units. They also help
catch spills. When they are kept clean, they
reflect heat better and look new longer.
If a reflector bowl gets discolored, some
of the utensils used may not be flat enough.
Or some may be too large for the surface
unit. In either case, some of the heat that is
meant to go into or around a utensil goes
down and heats the reflector bowl. This ex-
tra heat can discolor it.
CLEANING COOKTOP MODULES
_-__..-
CART
WHAT TO USE
HOW TO CLEAN
-___-
W&FACE UNITS
Do not clean
l
Sol1 burns otf.
l
Do not Immerse.
l
RIDDLE MODULE -~---
Warm soapy water
l
Do not Immerse griddle.
__-__
____.- --..--.
-
ORILL MODULE
Grill
Warm soapy water or
soapy steel wool pad
Heating Element
Do not clean
Basket with Ceramic Rocks
Ilot soapy water
Grease Well and Frame
Warm soapy water and
plastic scouring pad
l
Wash, rinse and ary well.
l
Do not use metal scouring pads or harsh
cleansers
l
Use plastic scouring pad if needed.
__~
l
Wash, rinse and dry well.
l
Use soapy steel wool pads for stubborn areas
l
Soil burns off.
l
Do not immerse
l
Clean often.
l
Soak and swish In hot, soapy water.
l
Replace as needed (contact dealer).
l
Wash, rinse and dry well.
0 Clean often.
Warm soapy water and
plastic scouring pad
Motor
l
Wash, rinse and dry well.
l
Clean after each use.
v;;ec!oth; warm soapy
.___~
l
Do not immerse.
l
Unplug before cleaning.
l
Wipe clean often.
14