Filter
Top Products
Cleaning and caring for y(
Control panel and knobs
1.
Firstmakesure knobsaresetonOFF then pull
knob straight off.
/
3. Wash knobs in warm soapy water. Rinse well
and dry.
wipe the
panei. Rinse and wipe dry.
4. Push the knobs straight back on. Make sure
they point to OFF.
Coil elements and reflector bowls
Removing
1.
Be sure controls are OFF and elements are
COOL.
/L
2. Lift the edge of the coil element opposite the
receptacle just enough to clear the reflector
bowl.
3. Pull the coil element straight away from the
receptacle.
4. Lift out the reflector bowl
15