Filter
Top Products
Reversing the door swing
TOOLS NEEDED:
5/16-inch hex-head socket wrench, No. 2
Phillips screwdriver, flat-head screwdriver,
X-inch open-end wrench
IMPORTANT INFORMATION:
l Before you begin, turn refrigerator OFF,
unplug it, and remove any food from door
shelves.
l Remove base grille.
l When removing hinges, keep doors closed
until ready to lift free from cabinet.
l To remove doors, start at the top hinge
and work your way down.
l To remove the center hinge screws,
remove the center hinge pin by turning it
l/4 to l/2 turn. It will pop up.
l To replace doors, start at the bottom hinge
and work your way up.
l Line up doors so they are centered
between the sides of the cabinet and
parallel with each other.
l Seal all unused openings with screws or
plastic plugs. Moisture will enter any
openings.
l Door seal may be adjusted by adding or
removing shims to the center and bottom
hinges.
TC
)P HINGE
Reversing the hinges
Cl
ENTER HINGE
I
OlTOM HINGE
I _
Shim
IOTE:
Jhen replacing the doors, set the door
ap at %-inch (17 mm).
22