Filter
Top Products
Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it, install
it, connect it to a power source, and level it.
Cleaning your refrigerator
Removing packaging materials
NOTE: Do not remove any permanent
Remove tape and any inside labels (except
instruction labels inside your refrigerator
the model and serial number label) before
Do not remove the Tech Sheet fastened
using the refrigerator.
under the refrigerator at the front.
To remove any remaining glue:
l Rub briskly with thumb to make a ball,
then remove.
OR
l Soak area with liquid hand dishwashing
Cleaning it before use
After removing all packaging materials,
clean your refrigerator before
using it, if necessary. See
cleaning instructions on
detergent before removing glue as
described above. Do not use sharp
instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners. These can
damage the material. See “Important
Safety Instructions” on page 3.
pages 24-25.
Installing it properly
1.
2.
3.
Allow I/Z inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
The refrigerator can be flush against the
back wall.
6