Filter
Top Products
33
The oven light will come on when you open the
oven door.
To turn the light on or off when the oven
door is closed:
•
Push the oven light switch on the backguard.
To replace the oven light:
1. Unplug range or disconnect power.
2. Remove the glass bulb cover in the back of
the oven by turning it
counterclockwise.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appliance bulb.
Door removal
pin hole
CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
THE OVEN LIGHT
4. Replace the bulb cover by turning it clockwise.
5. Plug in range or reconnect power.
Range
Front frame
hinge slot
2. Hold oven door so that the top edge of each
hinge hanger is horizontal. Insert hinge hangers
into the front frame hinge slots.
3. Rotate top of door toward range. Slide hinge
hangers down onto front frame support pins.
NOTE: Make sure the hinge hangers are fully
seated and engaged on the support pins.
4. Insert the door stop clip with the angular surface
at the top of the frame hinge slot, then push in
the bottom of the clip until flanges are flush with
the front frame.
5. Open the door completely and remove the door
removal pins. Save door removal pins for future
use.
6. Close the door.
Hinge
hanger
Door stop
clip
Angular sur-
face of door
stop
clip
Door removal
pin hole
Support pins