Filter
Top Products
Using your range
Using the Surface Units
l
Surface Unit Markers
III!
111)
is turned on by that knob.
Surface Heating
Indicator light
The solid dot in the surface unit
marker shows which surface unit
The SURFACE HEATING Indicator
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
Light on the control panel will glow
when a surface unit is on.
Burn and Fire Hazard
Be sure all control knobs are
turned to OFF and all indicator
lights are OFF when you are not
cooking. Someone could be
burned or a fire could start if
a surface unit is accidentally
left ON.
Until you get used to the settings, use the following as a guide. For best
results, start cooking at the high settings; then turn the control knob down to
continue cooking.
Use HI to start
Use MED-HI
Use MED for
Use MED-LO Use LO to
foods cook-
to hold a gravy, pud-
to keep food
ing; to bring
keep food
rapid boil; to
dings and
liquids to a
cooking after warm until
fry chicken or
icing; to
boil.
starting it ready to
pancakes. cook large
on a higher serve. Set the
amounts of
setting.
heat higher
vegetables.
or lower
within the LO
band to keep
food at the
temperature
you want.