Filter
Top Products
Replacing
3. Hold the surface unit as level as
possible with the terminal just
started into the receptacle. Push
the surface unit terminal into the
receptacle.
1. When terminal is pushed into the
receptacle as far as it will go, push
down the edge of the surface unit
opposite the receptacle. The ele-
ment hold down clip will keep the
surface unit from moving around.
I
!. Line up openings in the reflector
bowl with the surface unit recep-
tacle and the element hold down
CAUTION: Reflector bowls reflect heat back to the utensfls on the
surface unfts. They also help catch spills. When they are kept clean,
they reflect heat better and look new longer.
If a reflector bowl gets dlscolored, some of the utensils may not be flat
enough, or some may be too large for the surface unlt. In elther case,
some of the heat that’s meant to go Into or around a utensil goes down
and heats the reflector bowl. This extra heat can discolor ft. See Cook-