Filter
Top Products
The Storage Drawer
The storage drawer is for storing pots and pans. The drawer can be removed
to make it easier to clean under the range, and to check for installation of the
anti-tip bracket.
Use care when handllng the drawer.
Removing the storage drawer
1.
Empty drawer of any pots and
2. Lift back slightly and slide drawer
all the way-out.
pans.before removing drawer. Pull
drawer straight out to the first stop.
Lift front and pull out to the second
stop.
Replacing the storage drawer
1.
Fit ends of drawer sliz rails into
the drawer guides on both sides
of opening.
16
:I!
-KY-
2. Lift drawer froxnd push in until
metal stops on drawer slide
rails clear white stops on drawer
guides. Lift drawer front again
to clear second stop and slide
drawer closed.
To verity the an&tip brucket
Is engaged:
l Remove the storage drawer.
l Look to see if the anti-tip bracket
is attached to floor with screws.
l Make sure one rear leveling leg
is positioned under the anti-tip
bracket.
0 See Installation Instructions for
further details.