Filter
Top Products
OVEN LIGHT
SWITCH
(RF363PXVT~only)
OVEN TEMPERATURE
OVEN
SURFACE UNIT
CONTROL ,
/ SELECTOR
INDICATOR
Using your range
Using the Surface Units
Surface Unit Indicators
The solid dot in the surface unit
PUSH IN
indicator shows which surface unit
::
AND TURN
is turned on by that knob.
Signal light
One of the signal lights will glow
when a surface unit is on.
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
Until you get used to the settings, use the following as a guide. For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI to start
Use MED-HI
Use MED
Use MED-LO
Use LO to
foods cook-
to hold a for gravy,
to keep food
keep food
ing; to bring
rapid boil; to puddings
cooking after
warm until
liquids to a
fry chicken and icing; to
starting it
ready to
boil.
or pancakes.
cook large
on a higher
serve. Set the
amounts of
setting.
heat higher
vegetables.
or lower
within the LO
CAUTION: The use of the HI setting for long periods of time band to keep
can damage surface units and discolor chrome reflector
food at the
bowls. Start cooking on HI and turn control down to con- temperature
tinue cooking.
you want.
5