Whirlpool RF364PSB Range User Manual


 
The electronic oven control
Electronic
display
Oven 1 Temperature Clock Minute Hour Minute Startl Off/
selector pads
pad
timer
pads pads
enter cancel
pads
set and
pad pad
off pads
Display/clock
l
When you first plug in the range, every-
thing on the display will light up for
l-2 seconds, then a time of day and “PF’
will appear on the temperature display. If,
after you set the clock (page 12) “PF
again appears on the display, your electric-
ity was off for a while.
Reset the clock.
l
When you are not using the oven,
the
control is an accurate clock.
l
When you are using the oven or Minute
Timer,
the display will show times,
temperature settings, and what command
pads have been pressed.
l
When showing the time of day,
the
display will show the hour and minutes.
l
When you are using the Minute Timer,
the display will show minutes and seconds
in the following sequence:
- For settings from 1-59 minutes,
the
display will count down each second.
- For settings 1 hour or over,
the display
will count down each minute.
Command pads
The command pads tell the oven what to do
and in what order. A few examples:
-Clock tells the oven you are going to set
the clock.
-Off/Cancel
tells the oven to turn off.
Each command pad (except
Off/Cancel and
Start/Enter) has its own Indicator Light. The
Indicator Light comes on when you push the
command pad.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
command pads.
NOTES:
l
Control lock
is only available when oven
is not active or set.
l
Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Push and hold the Start/Enter pad for 5
seconds. A single tone will sound and “Lot”
will appear on the temperature display.
To
unlock the control panel:
Push and hold the Start/Enter pad for 5
seconds. A single tone will sound and “Lot”
will disappear from the temperature display.
11