Whirlpool RF364PSB Range User Manual


 
lf
a
Self-Cleaning cycle other than
3%
hours is desired,
use
the Hour and
Minute pads to set the desired cleaning
time.
Push
the “up” (A) or “down” (V)
pad(s) until a time between 2’/i-4% hour
shows on the display.
l
Use 2%
hour for light soil.
l
Use
3%4V2
hour for moderate to
heavy soil.
Push
the Start/Enter pad. HEAT and
ON will light up on the display to indicate
that the oven is programmed for the
Self-Cleaning cycle.
NOTE:
The display will show “door” and
a tone will sound once every five
seconds until the door is latched.
4. After the Self-Cleaning cycle is
started,
LOCK’D will light up on the
display when the oven temperature
goes above normal baking/roasting
temperatures. The Lock Lever must not
be moved and the door cannot be
opened when LOCK’D is on.
5. After the Self-Cleaning cycle is
completed and the oven reaches
normal baking/roasting temperatures,
LOCK’D will go off and “End” and
CLEAN will come on.
Move
the Lock
Lever back to the left.
DO
NOT FORCE
IT. Wait
until it moves easily.
23