Filter
Top Products
The Storage Drawer
The storage drawer is for storing pots and pans. The drawer can be removed
to make it easier to clean under the range, and to check for installation of the
anti-tip bracket.
Use care when handling the drawer.
Removing the storage drawer
1. Empty drawer of any pots and
pans before removing drawer. Pull
drawer straight out to the frrst stop.
Lift front and pull out to the second
stop.
2. Lift back slightly and slide drawer
all the way out.
Replacing the storage druwer
1. Fit ends of drawer slide rails into
the drawer guides on both sides
of opening.
14
2. Lift drawer front and push in until
metal stops on drawer slide
rails clear white stops on drawer
guides. Lift drawer front again
to clear second stop and slide
drawer closed
To verity the anti-tip bracket is
engaged:
l
Remove the storage drawer.
l
Look to see if the anti-tip bracket is
attached to floor with screws.
l
Make sure one rear leveling leg is
positioned under the anti-tip
bracket.
0 See Installation Instructions for
further details.