Filter
Top Products
Push the Start/Enter pad. The display will
go back to showing the current time of
day. The Delay Indicator Light will light up
and the Clean Time and Stop Time
Indicator Lights will flash to indicate that
the oven is programmed to start the Self-
Cleaning cycle at a later time.
When the start time is reached, the
Delay Indicator Light will go off, the Clean
Time Indicator Light will light up (stop
flashing) and the oven will start to clean.
To delay the start using Start Time:
Set both the Oven Selector and Oven
Temperature Control Knob to CLEAN.
Push the Delay Start Time pad. The
Clean Time Indicator Light will flash and
the Start Time Indicator Light will light up.
Use the Hour and Minute pads to set the
desired start time. Push the “up” (A) or
“down” (V) pad(s) until the correct time
shows in the display.
Push the Start/Enter pad. The display will
go back to showing the current time of
day. The Delay Indicator Light will light up
and the Clean Time and Start Time
Indicator Lights will flash to indicate that
the oven is programmed to start the Self-
Cleaning cycle at a later time.
When the start time is reached, the
Delay Indicator Light will go off, the Clean
Time Indicator Light will light up (stop
flashing) and the oven will start to clean.
4. After the SelFCleanIng cycle Is started,
the oven door will lock when the oven
temperature goes above normal baking/
roasting temperatures. The Lock Lever
must not be moved and the door cannot
be opened.
34
. -
ml
.
DELAY
DELAY