Whirlpool RF376PCY Range User Manual


 
If You Need Assistance Or
Sewice
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, please provide a detailed descrip-
tion of the problem, your appliance’s complete model and serial numbers and the purchase
date. (See page 2.) This information will help us respond properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM POSSIBLE CAUSE 1
SOLUTION
Nothing will
The power cord is not
Plug the power cord into a live tit-?uif
operate plugged into a live circuit with
with proper voltage. (See Installation
proper voltage. ; Instructions.)
A household fuse has blown
Replace household fuse or reset
or a circuit breaker has
circuit breaker.
tripped.
The oven will
The Oven Selector is not Turn the Oven Selector to the desired
not operate
turned to BAKE or BROIL. setting.
A delayed start time has been Wait for the start time to be reached.
programmed.
The Oven Temperature Turn the Oven Temperature Control
Control Knob is not turned to Knob to a temperature setting.
a temperature setting.
The electronic MEALTIMER’”
Set the MEALTIMER control cor-
control is not set correctly. rectly. (See ‘Using the electronic
MEALTIMER’“control” on page 18.)
The surface A household fuse has blown Replace household fuse or reset
units will not or a circuit breaker has circuit breaker.
operate
tripped.
The control knobs are not
being set correctly.
) Push control knobs in before turning
to a setting.
Control knob(s) You are not pushing in before
Push control knob(s) in before turning
will not turn
turning.
to a setting.
continued on next page
41