Filter
Top Products
Caring For Your Range
Burn or Electrical Shock Hazard
Make sure all controls are OFF
and the range is COOL before
cleaning. Fallure to do so can
result in burns or electrical
shock.
A
Control panel and knobs
1. Pull control knobs and command
buttons straight off.
2. Use warm soapy water and a soft
cloth, or spray glass cleaner, to
wipe the control panel. Rinse and
wipe dry.
3. Wash control knobs and command
buttons in warm soapy water. Rinse
well and dry. Do not soak.
4. Push control knobs and command
buttons straight back on. Make sure
control knobs point to OFF. Make
sure buttons have not turned oven
ON. If oven has been turned on,
push Oven Off button.
Surface units and
reflector bowls
Removing
1. Lift the edge of the unit opposite the
receptacle, just enough to clear the
element hold down clip, reflector
bowl and trim ring.
2. Pull the surface unit straight away
from the receptacle.
17