Filter
Top Products
Caring For Your Range
Burn and Electrical Shock Hazard
Make sure ail controls are OFF
and the range is cool before
cleaning. Failure to do so can re-
suit in burns or electrical shock.
Control panel and knobs
1. Turn control knobs to the OFF
position.
2. Pull control knobs and buttons
straight off.
3. Use warm soapy water or spray
glass cleaner, and a soft cloth, to
wipe the control panel. Rinse and
wipe dry.
4. Wash control knobs and buttons in
warm soapy water. Rinse well and
dry. Do not soak.
5. Replace control knobs and buttons
by pushing them firmly into place.
NOTE: When cleaning, never use steel
wool, abrasives, or commercial oven
cleaners which may damage the finish.
After cleaning, make sure all control
knobs point to the OFF position. Make
sure you have not turned oven ON
when replacing buttons. If oven has
been turned on, push Oven-Off button.
Surface units and
reflector bowls
Removing
Burn and Electrical Shock Hazard
Make sure ail surface units are
OFF before removing surface
units and reflector bowls. Failure
to do so can result in burns or
electrical shock.
17