Filter
Top Products
Any new time seftfng made while QUICK DEFROST Is operating will continue
the defrosting at only 20% of full power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
- Open the door.
- Check the food with long-tined fork; if center area is hard frozen, set additional
time. Remember that standing time is necessary to complete the
defrosting.
- Close the door and touch START to continue the cycle if no additional time is
needed.
OR...
-Touch in new instructions for additional defrosting time.
Cooking in two cycles
For best results, some recipes call for one Cook Power for a certain length of
time, and another Cook Power for another length of time. Your oven can be set
to change from one to another automatically.
DO THIS...
1. Put food in the oven and close
the door.
THIS HAPPENS...
2. Touch COOK CYCLE 1.
3.
4.
The COOK CYCLE 1 Indicator Light
will come on and the Display will
show four 0’s.
I
Touch Number Pads for the
cooking time you want in the
first cycle.
The Display will show the numbers
you touched in the order you
touched them. This example shows
3 minutes, 25 seconds.
., ..,
Touch COOK POWER. (if you
want the high Cook Power, skip
to step 6.)
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI”. This shows the oven is pre-
programmed to cook at full (HIGH]
power.
15