Using your range
>
Surface Unit
Controls
Indicators
Control knobs
must be
pushed in before turning
them
to a setting They can be set
anywhere between HI and OFF
The signal light will glow when
a surface unit is on. Be sure the
light is off when you are not
cooking.
Turn to setting
Until you get used to the settings. use the fol-
lowing as a guide.
, Signal Light
Use HI to start
foods cooking or
to bring liquids to
a boil.
Use MED-HI to
hold a rapid boil
or to fry chicken
or pancakes.
Use MED-LO to
keep food
cooking after
starting it on a
higher setting.
See “The Accessory Canning Kit” (page a) and
your “Cooking Guide” for important utensil
information.
A
Use LO to keep
food warm until
ready to serve.
Set the heat
higher or lower
within the LO
band to keep
food at the
temperature you
want.
“6 ’
Use MED for
grovy, puddings
and icings or to
cook large
amounts of
vegetables
SURFACE UNITS
Element will
be black dur-
ing cooking
if contact with
bottom of pan IS
good. Element
will not turn
red if gooa con-
tact IS made