Filter
Top Products
OVEN
OVEN
OVEN TEMPERATURE
SELECTOR
SIGNAL LIGHT
\
CONTROL
\ ,
Using your range
Using the Surface Units
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
The signal light will glow when a sur-
face unit is on.
Control knobs must be pushed in
before turning
them to a setting. They
can be set anywhere between HI
and OFF
Until you get used to the settings, use the following as a guide.
For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI
to start
Use MED-HI
Use MED
Use MED-LO
Use LO
to
foods cook-
to hold a for gravy,
to keep food
ing; to bring
keep food
rapid boil; to puddings
cooking after
warm until
liquids to a
fry chicken
and icing; to
starting it
boil.
ready to
or pancakes. cook large
on a higher
serve. Set the
amounts of
setting.
vegetables.
heat higher
or lower
within the LO
CAUTION: The use of the HI setflng for long periods of tlme
band to keep
can damage surface unlts and discolor chrome reflector
food at the
bowls. Start cooklng on HI and turn control down to con-
temperature
tfnue cooklng.
you want.
5