Filter
Top Products
OVEN “HEATING”
Using your range
Using the Surface Units
Control knobs must be pushed in
before turning
them to Q setting. They
con be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a guide.
For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI
to start
Use MED-Hi
Use MED
Use MED-LO
Use LO
to
foods cook-
to hold a
for gravy,
to keep food
keep food
ing; to bring
rapid boil; to
puddings
cooking after
worm until
liquids to a
fry chicken
and icing; to
starting it
ready to
boil.
or pancakes.
cook large
on a higher
serve. Set the
amounts of
setting.
heat higher
vegetables.
or lower
CAUTION: The use of the HI setting for long periods of time
can damage surface units and discolor chrome reflector
bowls. Start cooking on HI and turn control down to con-
tlnue cook1n.g.
within the LO
bond to keel
food at the
temperature
you want.
5