Filter
Top Products
“HEATING”
OVEN “ON”
SIGNAL LIGHT
OVEN
“LOCKE-D”
OVEN TEMPERATURE
SELECTOR
SIGNAL LIGHT
CONTROL
Using your range
Using the Surface Units
Surfoce Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
One of the signal lights will glow
when a surface unit is on.
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
Until you get used to the settings, use the following as a guide. For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI to start Use MED-HI Use MED
Use MED-LO
foods cook-
to hold a
for gravy,
to keep food
ing; to bring
rapid boil; to
puddings
cooking after
liquids to a
fry chicken
and icing; to
starting it
boil.
or pancakes.
cook large
on a higher
amounts of setting.
vegetables.
CAUTION: The use of the HI seftlng for long periods of time
can damage surface units and discolor chrome reflector
bowls. Start cooklng on HI and turn control down to con-
tinue cooklng.
Use LO to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
within the LO
band to keep
food at the
temperature
you want.
5