Filter
Top Products
Using your range
Using the Surface Units
Control knobs must be pushed in
before turning them
to a setting. They
can be set anywhere between HI
and OFF
Surface Unit Markers
The solid dot in the surface unit
marker shows which surface unit is
turned on by that knob.
Surface Unit
Indicator lights
One of the surface unit indicator
lights on the control panel will glow
when a surface unit is on.
Burn and Fire Hazard
Be sure all control knobs are
turned to OFF and all indicator
lights are OFF when you are not
cooking. Someone could be
burned or a fire could start if a
surface unit is accidentally
leff ON.
Until you get used to the settings, use the following as a guide.
For best
ESUltS,
start cooking at the high settings; then turn the control knob down to
continue cooking.
Use HI
to start
Use MED-HI
Use MED
for
Use MED-LO
Use LO
to
foods cook-
to hold a
gravy, pud-
ing; to bring
to keep food keep food
rapid boil; to
liquids to a
dings and
cooking after warm until
fry chicken or
.I
icing; to
starting it
ready to
pancakes.
cook large
on a higher
serve. Set the
amounts of setting.
heat higher
vegetables.
or lower
within the LO
band to keep
food at the
temperature
you want.