Filter
Top Products
Removing the crisper and cover
(Model RT14DKXE)
To remove the crisper:
1. Slide crisper out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift the front, then the back.
2. Lift cover up and out.
To replace the cover:
1. Fit notches in back of cover into the nubs
at the rear of the refrigerator cabinet.
2. Lower front into place.
then the back.
Slide out to the stop,
lift the front, and slide
out the rest of the way.
Adjusting the refrigerator shelves
Adjust shelves to match the way you use
your refrigerator.
To remove a shelf:
1. Remove all items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift the front.
4. Slide shelf out the rest of the way.
To replace a shelf:
1. Fit back of shelf on top of shelf guide with
wire stops on the bottom of the guide.
2. Lift front of shelf.
3. Slide shelf in until it clears all stops.
4. Lower front of shelf into place.
Using the ice cube trays
(Model RTl4DKXE)
If you don’t use cubes, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller
they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
11