Filter
Top Products
Changing the light bulb
Electrical Shock Hazard
Unplug the refrigerator before
removing light bulb.
Failure to do so can result in death
or electrical shock.
To change refrigerator light:
1. Unplug the refrigerator.
2. Reach behind Control Panel to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Plug in the refrigerator.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size and shape.
Understanding the sounds you may hear
Your new refrigerator may make sounds
that your old one didn’t. Because the
sounds are new to you, you might be
concerned about them. Don’t be. Most of
the new sounds are normal. Hard surfaces
like the floor, walls, and cabinets can make
the sounds seem louder.
The following describes the kinds of
sounds that might be new to you, and what
may be making them.
Slight hum, soft hiss
You may hear the refrigerator’s fan motor
and moving air.
Clicking or snapping sounds
The thermostat makes a definite click when
the refrigerator stops running. It also makes
a sound when the refrigerator starts. The
defrost timer will click when the defrost
cycle starts.
Water sounds
When the refrigerator stops running, you
may hear gurgling in the tubing for a few
minutes after it stops, You may also hear
defrost water running into the defrost
water pan.
13