Filter
Top Products
Installing it properly
1. Allow 3 inches (7.5 cm) between over-
head cabinets and refrigerator top.
2. Allow at least 1 inch (2.5 cm) between the
refrigerator condenser on the back and
the wail.
3. Allow l/i inch
(1.25
cm) on each side of
the refrigerator for ease of installation.
4. If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
5. Level your refrigerator.
Leveling it
Your refrigeratorhas 2 front, adjustable
rollers to prevent rocking on
uneven floors.
To adjust rollers:
1. Roll refrigerator into position.
2. Adjust rollers by turning the leveling
screws, located at the front of the base.
l
Turn clockwise to raise.
9 Turn counterclockwise to lower.
NOTE: Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
NOTE: lf you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.
I I
Use
a screwdriver
to adjust
p/ 2
Roller
‘f7 -
\
Leveling screw
View of roller with hinge in place
Leveling screw
6