Filter
Top Products
l
Good water quality is important for good
ice quality. It is not recommended that the
be maker be connected to a softened
water supply. Water softener chemicals,
such as salt from a malfunctioning soft-
ener, can damage the ice maker mold and
lead to poor ice quality. If a softened water
supply cannot be avoided, it is important
that the water softener be well maintained
and operating properly.
Changing the light bulb
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the refrigerator
at the main power supply.
Failure to do so could result in electri-
cal shock or personal injury.
To change the refrigerator light:
1. Disconnect refrigerator from power
supply.
2. Reach behind the Control Panel to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fii your refrigerator. Be sure to replace a
bulb with one of the same size, wattage and
shape.
Reversing the door swing
You can change the hinges on your refrig
erator so the doors open the other way.
Refer to the instruction sheet included with
your refrigerator.
11