Filter
Top Products
Installing it properly
1. Allow 3 inches (7.5 cm) between overhead
cabinets and refrigerator top.
2. Allow at least 1 inch (2.5 cm) between the
refrigerator condenser on the back and the
wall.
3. Allow % inch (1.25 cm) on each side of the
refrigerator for ease of installation.
4. If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
Leveling it
Make sure the refrigerator is level for
efficient operation.
To level refrigerator:
1. Keep the 4 bolts that held the refrigerator
in the shipping crate. They are the
leveling legs.
2. Screw these bolts all the way into the bolt
holes on the bottom comers of the
refrigerator.
3. Adjust each leg so that the refrigerator
does not rock.
4. Slide the refrigerator into place.
5. Place a level on top of the refrigerator -
first side-to-side then front-to-back.
l Turn a leg clockwise to raise the comer.
l Turn a leg counterclockwise to lower the
corner.
6. Check the refrigerator with the level
again. Repeat Step 5 until the refrigerator
is level.