Filter
Top Products
Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it, and level it.
Cleaning your refrigerator
Removing packaging materials
Cleaning it before use
Remove tape and any inside labels (except
After removing all packaging materials,
the model and serial number label) before
using the refrigerator.
To remove any remaining glue:
l Rub briskly with thumb to make a ball,
then remove.
OR
q
’ .
clean your refrigerator before
using it, if necessary. See
cleaning instructions on
pages 15-l 6.
l Soak area with liquid hand dishwashing
detergent before removing glue as
described above. Do not use sharp
instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners. These can
damage the material. See “Important
Safety Instructions” on page 3.
NOTE: Do not remove any permanent
instruction labels inside your refrigerator.
Do not remove the Tech Sheet fastened
under the refrigerator at the front.
WITH OUESTIONS OR COMMENTS