Filter
Top Products
13
Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
CYCLE
CYCLE
TIME
(Minutes)DRY
FINAL
RINSERINSE
MAIN
WASHRINSEWASH
A “•” shows what each cycle includes
•••60
†
•
•••
66
†
••
WASH
LATER
RINSE
LOW
ENERGY
CHINA
NORMAL
12••
RINSE/WASH LATER
For rinsing a few items to
be washed one or more
days later.
• Do not use detergent.
• Water is not heated
during Rinse/Wash Later.
• Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for prerinsed
or lightly soiled loads.
• Select High Temp Wash
to heat water in the main
wash.
• The water heats to 140°F (60°C) in
the final rinse.
NORMAL
Double wash for normal,
everyday soiled loads.
(The Energy Guide label
is based on this cycle.)
• Select High Temp Wash
to heat water in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
†
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
continued on next page