Filter
Top Products
14
SETTING THE CONTROLS
DRY
FINAL
RINSERINSE
MAIN
WASHRINSEWASH
A “•” shows what each cycle includes
HEAVY
Double wash for cleaning heavily
soiled loads.
• Select High Temp Wash
to heat water in the main
wash (marked
†
).
• The water heats to 140°F
(60°C) in the final rinse.
POTS-N-PANS
Double wash for maximum cleaning
of cooked-on or baked-on
foods.
• The water heats to 140°F
(60°C) in both washes.
• The water heats to 140°F
(60°C) in the final rinse.
CYCLE
POTS
-N-
PANS
HEAVY
•
•
••
••76
†
••
76
†
••••
Using Cancel/Drain
Press Cancel/Drain to cancel a cycle or to
clear the indicators.
To cancel a cycle:
• Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See the
“Changing a cycle or option setting”
section.)
• You can press Cancel/Drain again to stop
the drain immediately. Remember to drain
the dishwasher again before starting a
new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
CANCEL
DRAIN
†
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.
CYCLE
TIME
(Minutes)