Whirlpool Series 980 Dishwasher User Manual


 
A “0” shows what each cycle includes
CYCLE
MAIN FINAL
TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY (Minutes
NORMAL
biiiil
Double wash for normal,
everyday soiled loads.
.-
(The Energy Guide label is
based on this cycle.)
l Select High Temp Wash
to heat water in the main wash
(markedr).
.
at .
l
tt
a
66*
l The water heats to 140°F (60°C) in
the final rinse (markedtr) unless
you select Low Energy Rinse.
HEAVY
liiiii
Double wash for cleaning
heavily soiled loads.
l Select High Temp Wash
to heat water in the main
.
a
at
a
l tt
a
76’
wash (markedt).
l The water heats to 140°F (60%) in
the final rinse (markedrt) unless
you select Low Energy Rinse.
POTS-N-PANS
lli!ii
Double wash for maximum
cleaning of cooked-on or
-.
baked-on foods.
.
l The water heats to
at
a .t
a
al-t
a
140°F (60°C) in both
76’
washes (markedr).
l The water heats to 140°F (60%) in
the final rinse (markedrt) unless
you select Low Energy Rinse.
* Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. II the water is already hot enough, the cycle times will be as shown.
Using Cancel/Drain
Press Cancel/Drain to cancel a cycle or
clear option selections.
To cancel a cycle:
l Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See
“Changing a cycle or an option setting”.)