Filter
Top Products
PART
Broiler pan and grid
Oven racks
WHAT TO USE
Warm, soapy water or a soapy
steel wool pad.
Use Self-Cleaning cycle.
Warm, soapy water or soapy
steel wool pads.
HOW TO CLEAN
n Clean after each use.
n Wash, rinse and dry well.
n Do not clean in the Self-Cleaning Oven. (See note on
page 8.1
n Leave in oven during Self-Cleaning cycle.
. Wash, rinse and dry well. Use soapy steel wool pads
for heavily-soiled areas.
NOTE: The oven racks will discolor and be harder to
slide when left in the oven during the Self-Cleaning
cycle. If you want them to stay shiny, remove from
the oven and clean by hand. If racks are left in the
oven during the Self-Cleaning cycle, apply a small
amount of vegetable oil to the sides of the racks to
make them easier to slide.
Oven door glass
Self-Cleaning oven
Spray glass cleaner or warm,
soapy water and a non-
abrasive plastic scouring pad.
For areas outside the Self-
Cleaning area use warm
soapy water or soapy steel
wool pads.
. Make sure oven is cool.
. Follow directions provided with the cleaner.
. Wash, rinse and dry well.
. Follow directions started on page 8, “Using the Self-
Cleaning cycle.”
. Do not use commercial oven cleaners.
. Do not use foil to line the bottom of your Self-
Cleaning oven.
The oven light
To replace the oven light:
The oven light will come on when you
open the oven door. To turn the light on
when the oven door is closed, push the
Oven Light Switch on the control panel.
Push the switch again to turn off the
light.
Electrical Shock And Personal
Injury Hazard
. Make sure oven and light bulb are
cool and power to the oven has
been turned off before replacing
the light bulb. Failure to do so
could result in electrical shock or
bums.
. The bulb cover must be in place
when using the oven. The cover
protects the bulb from breaking,
and from high oven temperatures.
Since bulb cover is made of glass,
be careful not to drop it. Broken
glass could cause injury.
1. Turn off power at the main power
4. Replace the bulb cover by screwing
supply.
it in clockwise. Turn on power at
2. Remove the glass bulb cover in the
the main power supply.
back of the oven by screwing it out
counterclockwise.
NOTE: Make sure oven light is off during
the Self-Cleaning cycle. Keeping oven
3. Remove the light bulb from its
light on will shorten bulb life.
socket. Replace with a 40-watt
appliance bulb.
Page 10