Whirlpool SF377PEG Range User Manual


 
6. Press START TIME.
The start time/delay indicator light will light up.
7. Set the start time.
Press the “up” (s) or “down” (t) pad(s) until
the correct time shows on the display.
The example at the right shows a chosen
start time of 2 o’clock. The oven will shut off
by itself at 2:30 (the set start time plus the set
cook time).
8. Press START/ENTER.
NOTE: You can change the temperature or
time settings any time after pressing START/
ENTER by repeating Steps 2 through 7.
3. Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press to raise the tempera-
ture or to lower the temperature in 5°F
amounts. Use these pads until the temperature
you want shows on the display.
4. Press COOK TIME.
The cook time indicator light will light up.
5. Set the cook time.
Press the “up” (s) or “down” (t) pad(s) until the
correct time shows on the display.
TIME
ON
21
USING THE ELECTRONIC MEALTIMER
TM
CONTROL (CONT.)
USING YOUR RANGE
PRESS YOU SEE
(example shows bake at 375°F)
PRESS YOU SEE
PRESS YOU SEE
continued on next page
PRESS YOU SEE
PRESS YOU SEE
START
5 SEC
ENTER
PRESS YOU SEE
TIME
TIME
(example shows 30-minute
baking/roasting time)
(example shows 2 o’clock
start time)
COOK
TIME
START
TIME
ON
ON
ON
ON
ON