Filter
Top Products
25
SETTING THE CONTROLS
USING THE SELF-CLEANING CYCLE
1. Press AUTO CLEAN.
The clean indicator light will light up.
This will automatically set a 3
1
⁄2-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄2 hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
⁄2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
⁄2-4
1
⁄2 hours shows on the display.
•
Use 2
1
⁄2 hours for light soil.
•
Use 3
1
⁄2-4
1
⁄2 hours for average to heavy soil.
3. Start the oven.
The on and heat indicator lights will light up.
NOTES:
•
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
•
Do not attempt to open the oven door while
locking.
4. After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5. After the Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.
6. Press any pad or open the door to remove “End”
and bring back time of day.
AUTO
CLEAN
PRESS YOU SEE
PRESS YOU SEE
TIME
(example shows 4 1/2-hour
cleaning time)
START
5 SEC
ENTER
PRESS YOU SEE
YOU SEE
PRESS
OFF
CANCEL
ON
ON
ON
ON
(time of day)
YOU SEE
ON