Whirlpool Slide-In Electric Ranges Range User Manual


 
5
Product Dimensions
Freestanding Range
Slide-in Range
*When installed in a 24" (61.0 cm) base cabinet with
25" (63.5 cm) countertop; front of oven door protrudes
1⁷⁄₈" (4.8 cm) beyond 24" (61.0 cm) base cabinet.
Installation Clearances
Cabinet opening dimensions shown are for 25" (64.0 cm)
countertop depth, 24" (61.0 cm) base cabinet depth and
36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
Freestanding and Slide-in Ranges
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal
cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal
cabinet.
A. 7⁷⁄₈" (20.0 cm)
B. 30" (76.2 cm)
C.43⁷⁄₈" (111.4 cm)
overall height
D. 36" (91.4 cm) cooktop height
with leveling legs lowered
1¹⁄₂ turns
E. 30" (76.2 cm)
F. 27" (68.6 cm) max. to handle*
A. 35⁵⁄₈" (90.5 cm) cooktop
height with leveling legs
lowered 1¹⁄₂ turns
B. 30¹¹⁄₁₆" (77.9 cm)
C. 25" (63.5 cm)
D23
¹⁄₂" (59.8 cm)
E. 27" (68.6 cm) to handle*
F. 30" (76.2 cm)
A
B
C
D
E
F
D
F
A
E
B
C
A. 18" (45.7 cm) upper cabinet to countertop
B. 13" (33.0 cm) max. upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum clearance to top of the cooktop, see NOTE.
E. 30" (76.2 cm) min. opening width
F. This shaded area recommended for installation of rigid gas pipe
G. 8" (20.3 cm)
H. Grounded outlet
I. 7" (43.2 cm)
J. 2" (5.1 cm)
K. 4¹⁄₂" (11.4 cm)
L. 2" (5.1 cm) min. clearance from both sides of the range to the
side wall or other combustible material
5" (12.7 cm) for the ranges with reversible grate insert (wok ring)
M. Cabinet door or hinge should not extend into the cutout.
M