Filter
Top Products
REVEWING THE DOOR SWING
(on some models)
TOOLS NEEDED:
Reversing the hinges
%6-inch hex-head socket wrench, No. 2 Phillips screw-
driver, flat-head screwdriver, %-inch open-end wrench.
SUGGESTION: Reversing the door swing should be
performed by a qualified person.
IMPORTANT INFORMATION:
0 Before you begin, turn refrigerator OFF, unplug it, and
remove any food from door shelves.
0 When removing hinges, keep doors closed until ready to
lift free from cabinet.
0 To remove doors, start at the top hinge and work your
way down.
0 To replace doors, start at the bottom hinge and work
your way up.
CENTER HINGE
0 Line up doors so they are centered between the sides of
the cabinet and parallel with each other.
0 Seal all unused openings with screws or plastic plugs.
Moisture will enter any openings.
Screws -
NOTE: After the doors are reversed, reinstall the handles.
If the doors are not shutting on their own, see “Leveling”
in the “Installing Your Refrigerator” section.
BOTTOM HINGE
Door stop,
25