14
To replace the cover:
1. Fit cover tabs into lowest cabinet slots and push in.
Lower the front retainers into place.
2. Insert cover support (with the long tab toward the front)
into the groove on the underside of the cover.
NOTE: If the support needs adjustment, turn base
clockwise to raise or counter-clockwise to lower.
Freezer Shelf
(on some models)
To remove the shelf:
1. Remove items from the shelf.
2. Lift back of shelf over stop.
3. Slide shelf straight out.
To replace the shelf:
1. Slide back of shelf into shelf tracks on walls of cabinet.
2. Slide shelf in all the way.
CARING FOR YOUR
REFRIGERATOR
Cleaning Your Refrigerator
Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about once a
month to prevent odors from building up. Wipe up spills
immediately.
Energy Saving Tip:
Clean the condenser coils regularly, as described in the
cleaning chart in this section.
To clean your refrigerator:
■ Unplug refrigerator or disconnect power.
■ Remove all removable parts from inside, such as
shelves, crispers, etc.
■ Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
■ Hand wash, rinse, and dry all surfaces thoroughly.
■ Plug in refrigerator or reconnect power.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion,
or fire.