Filter
Top Products
Removing the ice maker storage
Remove, empty and clean the storage bin ifz
l the ice dispenser
has not, or will not, be used
for a week or more.
l a power failure causes ice in the bin to melt and
freeze together.
l
the ice dispenser is not used regularly.
To remove ke bin:
1.
Pull the covering panel out from the bottom
and slide it to the rear.
2. Lii the signal
arm
so it clicks into the OFF (up)
position. Ice can still be dispensed, but no
more can be made.
3. Lii the front of the storage bin and pull it out.
4. Empty the ice bin. Use hot or warm water to
malt
the
ice if necessary. Never use anything
l
harp to break up ice in the bin. This can
damage the bin and diinser mechanism.
5. Wash with mild detergent. Rinse well. Do not
use harsh or abrasive cleaners or solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Then push the signal
arm down to the ON positiin to restart ice
production.
12