Filter
Top Products
Before Using Your
Rehigemtor
In This Section
PW
P4P
ckanlng it
. . . . . . . . . . . . . . . . . . . . . . . ..U.......“““.......“..“....”
5
lnstdling
It propdy
““..“......“......l................
5
Plugging It In
. . . . . . . ..a..+.-........-.....“.-..“.“““....
5 Lwellng It
..““--.“.-..“““1.1-...““..“.-.~
6
lt is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, il neces-
sary. See cleaning instructions on page 17.
Plugging it in
Recommended Groundlng Method
A115Volt,5OHz.,AConly15or20ampere
fused and properly grounded electrical supply is
required. lt is recommended that a separate
circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
See Electrical Requirements and Grounding
Instructions Sheet in your Literature Package.
hmomtor
power oord
lnstalling it properly
1.
Allow ‘A inch (1.25 cm) space on each side
and at the top of the refrigerator for ease of
installation.
2. fl the refrigerator is to be against a wall, you
might want to leave extra space on the hinge
side closest to the wall so the door can be
opened wider.
3. The refrigerator can be flush against the wall.