Filter
Top Products
Models lTl4CK, lT16CK, lTl6DK and
TT18CK
Use screwdrier
to adjust
Right
to
raise;
left to lower
1. Place a level on top of the refrigerator-
first side to side, then front to back. Turn
each leveling screw clockwise to raise
the front of the refrigerator. Turn each
leveling screw counterclockwise to lower
the front of the refrigerator.
2. Check the levelness again and repeat
step 1 until the refrigerator is level.
Models IT2OAK and lT2OBK
Use screwdtivwr
3. Check the levelness again and repeat
step 2 until the refrigerator is level.
4. Replace base grille. (See page 7.)
Right to raise;
left to lower
1. Remove base grille. (See page 7.)
2. Place a level on top of the refrigerator-
first side to side, then front to bad. Turn
each leveling screw clodcwise to raise
the front of the refrigerator. Turn each
leveling screw counterclockwise to lower
the front of the refrigerator.
I
I
Parts And Features
Models lT14CK (shown) and TTI 6DK
Ice cube
trays
Freezer shelf
(till-width on 7716DK,
half-width on TTl4CK)
Model and
serial number
label
(on side wall)
Crisper w ver
Crispers y
Leveling
leg
Juice can
rack
- Egg nest
Butler
- compartment
Ao’justable
- shelves
1
stationaly
door shelves
Page 3