Filter
Top Products
I
J
Using Your Refrigerator-Freezer
Setting the controls
Changing control settings
Controls for the refrigerator and freezer are
in the refrigerator. When the refrigerator is
plugged in for the first time:
1. Set the Refrigerator Control to 3
(lT20AK and TT20BK to 4).
2. Set the Freezer Control to B (lT20AK
and TT20BK to C).
3. Let the refrigerator and freezer
1. Adjust the Refrigerator Control according
compartments get cold for several hours
to the settings listed in the chart below.
before adding food.
2. Wait 24 hours or more before making
4. When the refrigerator keeps milk or juice
additional adjustments to the Refrigerator
as cold as you like and the freezer
Control or adjusting the Freezer Control.
compartment keeps ice creain firm, the
settings are correct for your household.
Condition
Check if
Set control setting
lT2OAK and
lT2OBK
Refrigerator section
TOO WARM
Freezer section
TOO WARM
l
Door is opened often.
l
Large amount of food added.
l
Too-warm room temperature.
l
Door is opened often.
l
Large amount of food added.
. Too-cold room temperature
(freezer can’t cycle often enough).
Refrigerator 4
Freezer
C
Refrigerator 3
Freezer
A
Both sections
TOO WARM
l
Door is opened often.
. Large amount of food added.
l
Too-warm or too-cold room
temperatures.
Refrigerator 4
Freezer
B
6
C
Refrigerator section
TOO COLD
l
Controls not set correctly.
Refrigerator 2
Freezer
B
2
A
Ice is not made
fast enough
l
Heavy ice usage.
l
Very cold room temperature
(fre’ezer can’t cycle often enouqh).
Refrigerator 3
Freezer
A
4
A
Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator.
EXTERIOR MOISTURE CONTROL
4 OFF 0 ON b
mm
1. Use the OFF setting when humidity is
low.
2. Use the ON setting if moisture forms on
the outside of the refrigerator.
Adjusting refrigerator shelves
Models lT14CK, lT14EK, lTl6CK,
TTlGDK, lTl8CK and lT18EK
To remove:
1. Remove food from shelf.
2. Slide shelf straight forward to the guide
stops.
3. Lift front until it clears stops, then slide
shelf out the rest of the way.
To replace:
1. Fit back of shelf on top of guides with
wire stops on the bottom of the guides.
2. Lift front; slide shelf in until it clears guide
stops. Slide shelf in the rest of the way.
Models lT2OAK and TTSOBK
To remove:
1. Remove food from shelf.
2. Tilt up front.
3. Lift up back until hooks clear the shelf
support slots.
4. Pull shelf straight out.
To replace:
1, Guide the rear shelf hooks into shelf
support slots.
2. Tilt up front until hooks drop into slots.
Lower front of shelf to level position.
Page 6