Filter
Top Products
4
Product Dimensions
*Excludes handle. Dimension given is from wall to front of oven
door and will vary based on electric outlet receptacle installation.
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm)
countertop depth, 24" (61.0 cm) base cabinet depth and
36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
A freestanding range may be installed next to combustible walls
with zero clearance.
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal
cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an uncovered wood or metal cabinet.
A.46⁷⁄₈" (119.9 cm)
B. Model/serial number rating
label (located on bottom right
front of the toe kick plate)
C.35⁷⁄₈" (91.4 cm)
D.29⁷⁄₈" (75.9 cm)
E.26⁵⁄₁₆" - 27¼" (66.8 - 69.2 cm)*
A
E*
D
C
B
A. 13" (33 cm) upper cabinet
depth
B. 30" (76.2 cm) min. opening
width
C.For minimum clearance to the
top of the cooktop,
see NOTE.
D.30" (76.2 cm) min. opening
width
E. Cabinet door or hinge should
not extend into cutout.
F. 3-wire shaded area -
7" (17.8 cm) min. from left side
cabinet, 5¾" (14.6 cm) max.
from floor, 6" (15.2 cm) max.
width*
G.4-wire shaded area -
10" (25.4 cm) min. from right
side cabinet, 5¾" (14.6 cm)
max. from floor, 6" (15.2 cm)
max. width*
H.1½" (3.8 cm) min. from floor if
using a flush mount outlet.
*Nothing located in shaded areas can extend more than 1½"
(3.8 cm) from wall or range will not slide all the way back.
A
B
D
F
E
C
G
H