Whirlpool 400 Dishwasher User Manual


 
14
NORMAL
Double wash for normal,
everyday soiled loads.
(The Energy Guide label
is based on this cycle.)
Select High Temp
Wash to heat water in the main
wash.
The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
HEAVY
Double wash for cleaning
heavily soiled loads.
Select High Temp
Wash to heat water in
the main wash.
The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
POTS-N-PANS
Double wash for maximum
cleaning of cooked-on or
baked-on foods.
The water heats to
140°F (60°C) in both
washes.
The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
CYCLE
CYCLE
TIME
(Minutes)
FINAL
RINSERINSE
MAIN
WASHRINSEWASH
A “” shows what each cycle includes
66
NORMAL
HEAVY
POTS
-N-
PANS
••76
••76
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
Using Cancel/Drain
Press Cancel/Drain to cancel a cycle or
clear option selections.
To cancel a cycle:
Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See the
“Changing a cycle or an option setting”
section.)
CANCEL
DRAIN
SETTING THE CONTROLS
DRY