Filter
Top Products
17
Understanding the status indicators
Lock Out
The Lock Out feature lets you lock out the
function of the control
pads. When using Lock
Out, you cannot start
the dishwasher.
To use Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator glows.
To turn off Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator turns off.
Washing
The Washing indicator glows at the start
of the first fill of any cycle
(except Rinse/Wash
Later) and remains
on until the end of the
main wash.
Water Heating
The Water Heating indicator glows when-
ever water is heated
during a cycle.
AIR DRYAIR DRY
WASHING
WATER HEATINGWATER HEATING
Rinsing
The Rinsing indicator glows during the
last two rinses of all
cycles.
Drying
The Drying indicator glows during the
drying portion of each
cycle – even if you select
Air Dry. It turns off at
the end of the cycle. If
dishes are not as dry as you expected when
using Air Dry, either allow longer drying
times (overnight) or do not use Air Dry.
Add-A-Dish
The Add-A-Dish indicator glows as soon
as the dishwasher starts
and keeps glowing until
the main wash portion of
the cycle begins. You
can add an additional item while the indica-
tor is on.
Clean
The Clean indicator glows at the end of a
cycle to show that the
load is clean. All other
indicators turn off. The
Clean indicator glows
until you press Cancel/Drain or any other
control pad.
RINSING
DRYING
CLEAN
ADD-A-DISH
SETTING THE CONTROLS
LOCK OUTLOCK OUT